Siemens RDG100T Uživatelský manuál stáhnout pdf

Building Technologies RDG100T 01.02.2011 1/5

1. Release screws on left side and uncover the cotroller

2. Connect wires to terminals and fix the base plate to the wall:

M3181en.LICON

128.0

93.0

28.2

27.8

28.5

16.0

9.0

28.3

27.7

28.3

4.0

30.8

28.3

Commissioning guide of RDG100T

with LICON fan-

coil units

2-pipe fan-coil unit, 2-position actuator 4-pipe fan-coil unit, 2-position actuators

M1 – fan, V1 – valve

M1 – fan, V1 – heating valve, V2 – cooling valve

1 2 3 4 5

Building Technologies RDG100T 01.02.2011 1/5 1. Release screws on left side and uncover the cotroller 2. Connect wires t

2/5 01.02.2011 3. Set the DIP switches on the rear side of the controller: 4. Close the controller and tighten the screws 5. Set the

Building Technologies RDG100T 01.02.2011 3/5 6. If you wish to change other parameters too, follow the parameter list bellow: For proper contro

4/5 01.02.2011 RDG100T Building Technologies Par. Name Factory setting Range Expert level P40 Functionality of X2 2 = Heat / cool chan

Building Technologies RDG100T 01.02.2011 5/5 Par. Name Factory setting Range Expert level P67 Fan start delay in 2P control 0 s 0.

Další dokumenty pro Termostaty Siemens RDG100T

Žádné komentáře