
Configuring WLAN Services
Configuring Accounting and Authentication
SCALANCE WLC711
6-22 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
4. In the Common RADIUS Settings section, select the appropriate checkboxes to include the
Vendor Specific Attributes in the message to the RADIUS server:
– AP’s
– VNS’s
– SSID
– Policy
– Topology
– Ingress Rate Control
– Egress Rate Control
– Replace Called Station ID with Zone
The Vendor Specific Attributes must be defined on the RADIUS server.
5. To save your changes, click Save.
Defining RADIUS Settings for Individual RADIUS Servers
To Define RADIUS Settings for Individual RADIUS Servers:
1. From the top menu, click VNS Configuration. The Virtual Network Configuration screen is
displayed.
2. In the left pane expand the WLAN Services pane, then click the WLAN Service. The WLAN
Services configuration page is displayed.
3. Click the Auth & Acct tab.
4. In the Server table, click the RADIUS server you want to define, and then click Configure. The
RADIUS Parameters dialog is displayed.
5. For NAS IP Address, accept the default of “Use VNS IP address” or de-select the checkbox
and type the IP address of a Network Access Server (NAS).
6. For NAS Identifier, accept the default of “Use VNS name” or type the Network Access Server
(NAS) identifier. The NAS identifier is a RADIUS attribute that identifies the server
responsible for passing information to designated RADIUS servers and then acting on the
response returned.
7. Click OK.
Komentáře k této Příručce