Siemens EK 730 Series Provozní pokyny stáhnout pdf (Strana 34)

Connection

5.7 Replacing the PLUG (C-PLUG or KEY-PLUG)

SCALANCE W770/W730

34 Operating Instructions, 11/2014, C79000-G8976-C325-04

Inserting the PLUG

Follow the steps below to insert a PLUG in the device:

1. Turn off the power to the device.

2. Release the screw slot cover (position

①) and swing the slot cover to the side (position

②).

3. The housing of the PLUG has a protruding ridge on the long side (position

④). The slot

has a groove at this position. Insert the PLUG correctly oriented into the slot. The PLUG

is correctly inserted when it is completely inside the device and does not jut out of the

slot.

4. Close the slot cover (position

②).

5. Tighten the screw at position

① to secure the slot cover.

Licenses on the KEY-PLUG

A C-PLUG only stores information about the configuration of a device. In addition to the

configuration, a KEY-PLUG also contains a license with which you can enable special

functions, for example iFeatures:

Type

Order number

KEY-PLUG W780 iFeatures AP

6GK5907-8PA00

KEY-PLUG W740 iFeatures Client

6GK5907-4PA00

KEY-PLUG W700 Security

6GK5907-0PA00

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Žádné komentáře

Siemens EK 730 Series Provozní pokyny Strana 34