Siemens TL.. Manuál s instrukcemi stáhnout pdf (Strana 29)

Internal Accessories

Preliminary Installation Procedures

3. Remove the breaker cover by ﬁrst removing the four #10 Phillips

head screws at the corners and the four 1/4” Phillips head screws

in recesses in cover.

4. Remove cover.

5. Remove the trip unit if installed, by removing trip unit retaining

screw.

6. Slide the trip unit up to clear the support bracket pins.

7. Remove the trip unit by pulling the trip unit away from the trip unit

plug.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

Žádné komentáře

Siemens TL.. Manuál s instrukcemi Strana 29