Siemens OSM Provozní pokyny Strana 78

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 98
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 77
Firmware Update
Industrial Ethernet OSM/ESM
74
C79000-Z8976-C068-10
Follow the steps outlined below in Hyperterminal:
1. Set up a new connection (for example with File -> New).
2. Set the following properties for the connection as shown in the dialog below:
3. Reset the OSM/ESM. Press the Select/Set button during operation, if necessary
several times until the display mode LEDs indicate the port status (all display
mode LEDs off). Then press the Select/Set button for at least 6 seconds. The
display mode LEDs begin to flash after approximately 3 seconds, 2 seconds
later the OSM/ESM is reset. (All LEDs go on briefly and then off again).
Zobrazit stránku 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 97 98

Komentáře k této Příručce

Žádné komentáře