Siemens Codelock K44 Duo Servisní příručka stáhnout pdf (Strana 10)

10 K44 Duo Technical manual

Programming

Before you start programming K44 Duo, make

a note of the codes to be used, to what timing

group they should belong and which relay

output they should control. At the back of this

manual you will find a chart designed for this

purpose. Look at the chart as you program

K44 according to the instructions below.

Buzzer and LEDs

During programming you will be guided by

the buzzer and the LEDs.

In programming mode before a function is

chosen: Green and yellow LED flashes.

During programming: Yellow LED goes out.

Green LED is lit.

Correct instruction: Confirmed by a rising

signal consisting of two quick beeps.

Faulty instruction: Confirmed by a falling

signal consisting of two quick beeps.

Note! During programming mode, if a

button is not pressed within 20 seconds, the

code lock goes back to normal operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Komentáře k této Příručce

Žádné komentáře