Siemens Codelock K44 Duo Uživatelský manuál Strana 13

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 116
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 12
K12 Installation & User Manual 13
ENG
Choose password
The first thing to do before you can start pro-
gramming is to choose a password.
Press and hold the SW1 button on the code
lock’s circuit board. Both LEDs are lit.
Enter a 6-digit password.
Make a note of the new password in the
chart at the back of the manual.
Change password
Press B and enter the current password.
Enter A27.
Enter the new password. A warning tone is
heard.
Enter the new password once again.
Press B to leave programming mode.
Make a note of the new password in the
chart at the back of the manual.
Programming commands
Always press B and the password before any com-
mands are used.
Leaving the programming mode can be done by
pressing B.
1�
2�
3�
1�
2�
3�
4�
5�
6�
Zobrazit stránku 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 115 116

Komentáře k této Příručce

Žádné komentáře