Siemens SISTORE AX9 Uživatelský manuál stáhnout pdf (Strana 14)

Installation

2.4 Connecting the Video Source

Fig. 4 Video input connectors.

Connect the coaxial cables from the video sources to the BNC Video In

connectors.

2.5 Connecting the Loop Through Video

Fig. 5 Video Loop Through connectors.

If you would like to connect your video source to another device, you can use the

Loop BNC connectors.

NOTE:

The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC unless it is

connected to another terminated device because it will cause poor quality video.

2.6 Connecting the Monitor

Fig. 6 Video Out connectors.

Connect the monitor to either the Video Out or SVHS Out connector.

Connect the spot monitor to the SPOT connector if required.

NOTE:

If your monitor has an SVHS input, use it for better quality video display.

NOTE:

The Video Out (BNC) and the SVHS Out connectors may be connected to individual monitors for

simultaneous operation.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 91 92

Žádné komentáře

Siemens SISTORE AX9 Uživatelský manuál Strana 14