Siemens CU240S DP Uživatelský manuál Strana 8

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 82
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 7
SINAMICS G120
Inverter chassis units 0.37 kW to 132 kW (0.5 hp to 200 hp)
SINAMICS G120 chassis units
3/8
Siemens D 11.1 · 2008
3
Design (continued)
Supplementary system components
The following supplementary system components are available
for SINAMICS G120 inverter chassis units:
Basic Operator Panel BOP
The Basic Operator Panel BOP can be plugged onto the Control
Unit and can be used to commission drives, monitor drives in
operation and input individual parameter settings. The BOP also
provides a function for a quick copying of parameters.
PC inverter connection kit
For controlling and commissioning an inverter directly from a PC
if the appropriate software (STARTER commissioning tool) has
been installed.
The STARTER commissioning tool is supplied with the PC in-
verter connection kit on DVD.
Brake Relay
The Brake Relay allows the Power Module to be connected to an
electromechanical motor brake, thereby allowing the motor
brake to be driven directly by the Control Unit.
Safe Brake Relay
The Safe Brake Relay allows the Power Module to be connected
to an electromechanical motor brake, allowing the brake to be
directly and safely controlled by the Control Unit in accordance
with EN 954-1, category 3 and IEC 61508 SIL 2.
Adapter for DIN rail attachment
The adapter for DIN rail attachment can be used to mount invert-
ers of frame sizes FSA and FSB on DIN rails (2 units with a cen-
ter-to-center distance of 100 mm).
Shield connection kit
The shield connection kit makes it easier to bond the shields of
supply and control cables, offers mechanical strain relief and
thus ensures optimum EMC performance.
Configuration
The following electronic configuration and engineering tools are
available for SINAMICS G120 inverter chassis units:
SD configurator selection aid within the CA 01
The interactive catalog CA 01 – the offline mall of Siemens Auto-
mation and Drives (A&D) – contains over 100000 products with
approximately 5 million potential drive system product variants.
The SD configurator has been developed to facilitate selection
of the correct motor and/or inverter from the wide spectrum of
Standard Drives products. The configurator is integrated in this
catalog with the selection and configuration tools as a “selection
help” on CD 2 “Configuring”.
SIZER configuration tool
The SIZER PC tool provides an easy-to-use means of configur-
ing the SINAMICS and MICROMASTER 4 drive family. It provides
support when setting up the technologies involved in the hard-
ware and firmware components required for a drive task. SIZER
supports the complete configuration of the drive system, from
simple individual drives to complex multi-axis applications.
STARTER commissioning tool
The STARTER commissioning tool provides menu-guided assis-
tance with commissioning, optimization and diagnostics.
STARTER is not only designed for use on SINAMICS drives but
also for MICROMASTER 4 units and frequency inverters for the
distributed I/Os SIMATIC ET 200S FC and SIMATIC ET 200pro
FC.
Drive ES engineering system
Drive ES is the engineering system used to integrate Siemens
drive technology into the SIMATIC automation world easily, effi-
ciently and cost-effectively in terms of communication, configu-
ration and data management. The STEP 7 Manager user inter-
face provides the basis for this procedure. A variety of software
packages, i.e. Drive ES Basic, Drive ES SIMATIC and
Drive ES PCS 7, is available for SINAMICS.
© Siemens AG 2008
Zobrazit stránku 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 81 82

Komentáře k této Příručce

Žádné komentáře