Siemens Advance Network Gateway Uživatelský manuál stáhnout pdf (Strana 40)

Setting Network Address

Description

This section provides instructions to configure the ANCB/DN.

Command Line

Definitions

Chapter 3, Command Line Summary, provides definitions for all of the

commands you will be using in this chapter.

Instructions

1. Connect a standard 9-pin COM cable from the designated PC COM

1 to the RS232 Configuration Connector on the ANCB (see Figure

4-1).

2. Open Windows HyperTerminal program on your PC; reference

Configuring Your PC, page

22.

3. Connect and Log on to Advance Maxum ANCB; reference

Establishing a Connection, page

27.

The Connect Screen will appear with the login information and the

local prompt. The local prompt indicates that you are communicating

with the unit connected directly to the PC.

Ver 1.0

30 • Data Communications Setup 2000592-001

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

Žádné komentáře

Siemens Advance Network Gateway Uživatelský manuál Strana 40