Siemens HydroRanger 200 Uživatelský manuál stáhnout pdf (Strana 4)

Level measurement

Continuous level measurement — Ultrasonic controllers

HydroRanger 200

4/161

Siemens FI 01 · 2014

■

Dimensional drawings

HydroRanger 200, dimensions in mm (inch)

■

Schematics

HydroRanger 200 connections

Panel mount version

Wall mount version

Siemens Milltronics

recommends using a hole

punch for drilling the holes.

Suitable location for

conduit entrances

Mounting holes

(accessed under lid)

Ø 4.3 (0.17) (x4)

Cover

screws

(x6)

Mounting

holes

Ø 4.3

(0.17) (x4)

(provided by customer)

Mounting screw

Housing

14.9

(0.58)

15.2

(0.6)

160.3 (6.325)

6.6

(0.26)

278 (10.94)

(1.40)

(3.82)

198 (7.80)

130 (5.125)

227 (8.93)

240 (9.45)

(3.58)

Notes

1. Use 2-core copper wire, twisted, with shield, for expansion up to

365 m (1 200 ft.). Route cable in grounded metal conduit, separate

from other cables.

2. Verify that all system components are installed in accordance with

instructions.

3. Connect all cable shields to the HydroRanger 200 shield connec-

tions. Avoid differential ground potentials by not connecting cable

shields to ground (earth) anywhere else.

4. Keep exposed conductors on shielded cables as short as possible

to reduce noise on the line caused by stray transmissions and noise

pickup.

Relays shown in released

state

DC version

See note 1

DISCRETE

INPUTS

SHIELD

mA INPUT

Relay 1

Relay 2

Relay 3

Relay 4

Relay 5

Relay 6

SHIELD

SYNC

4 ... 20 mA

OUTPUTS

COM

RS 485

TS-3

L1L2/N

12-30 V

TB2

TB3

TB1

icenta Controls Ltd

Tel: +44 (0)1722 41 Fax: +44 (0)1722  e: [email protected] www.icenta.co.uk

1 2 3 4

Level measurement 1

Komentáře k této Příručce

Žádné komentáře

Siemens HydroRanger 200 Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Siemens HydroRanger 200