Siemens SIMATIC NET PROFIBUS Provozní pokyny stáhnout pdf (Strana 266)

100

101

Installing LAN Cables

C-4

PROFIBUS Networks SIMATIC NET

6GK1970-5CA20-0AA1 Release 2 05/2000

C.3 Mechanical Protection of LAN Cables

Protection of Electrical and Optical LAN Cables

Mechanical protection is required to protect LAN cables from breaks or mechanical

damage.

Note

The guidelines for mechanical protection apply both to electrical and optical

cables.

Mechanical Protection

The following measures are recommended to protect LAN cables from physical

damage:

S When a cable cannot be installed on a cable rack or similar construction, it

should be installed in a conduit (for example PG 11-16).

S In areas where the cable is subject to mechanical stress, install the cable in a

heavy-gauge aluminum conduit or in a heavy-gauge plastic conduit (see Figure

C-1)

S When 90° bends are necessary and at the junctions between buildings (for

example expansion joints), a break in the conduit is acceptable only when there

is no likelihood of damage to the cable, for example due to falling objects (see

Figure C-2).

S In areas where the cable is likely to be walked on or driven over, the cable must

be protected from damage by a closed heavy-gauge aluminum or steel conduit.

As an alternative, the cable can be laid in a metal cable gutter.

Remember the instructions for laying cables outside buildings.

Figure C-1 Mechanical Protection of the LAN Cable

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 489 490

Komentáře k této Příručce

Žádné komentáře

Siemens SIMATIC NET PROFIBUS Provozní pokyny Strana 266

Komentáře k této Příručce

Související produkty a manuály pro Sítě Siemens SIMATIC NET PROFIBUS