Siemens Sinumerik 810T Uživatelský manuál stáhnout pdf (Strana 72)

EMCO WINNC SINUMERIK 810/820 T SURVEY PAGES

G 4

SETTING DATA

Using setting data, the operator (user) fixes certain

operating states. Setting data are adjustable for:

• Programmable and settable zero offsets

• External zero offsets

• R parameters

• Spindle data

• Axial data

• Scale modification

• Data transfer

• General data (setting data bits).

SIMULATION

To test the program the programmed movements

are shown on the screen display. Programming errors

are displayed as alarms.

SINGLE BLOCK

After „Program start“ only one block is processed.

The next blocks is only processed after another

operation of „Program Start“.

SKIP YES-NO

With „YES“ selected, the blocks marked with an

oblique (/) are skiped during program processing

(Program control).

SPECIAL BLOCK

You select G04, G92, M19, G58, G50 and G51 with

this softkey.

SPECIAL FUNCT.

The special functions M00, M01. (1st M Group) and

M36, M37 (4th M Group) are grouped together in this

function.

SPINDLE

You select the M function for the spindle motion with

this softkey.

Preselect: „GUIDING“ softkey

In "SETTING DATA": Enter the gear position of the

PC TURN 50 with SPINDLE.

START

You activate the selected softkey function.

STOP

You stop the activated softkey function.

STORE

PRESET: not active

GUIDING: store without leaving the menu

STORE CHOICE

Store the values entered and jump back to the

selection menu.

STORE PLANE

Planes defined via machine data (G17, G18, G19) or

by manual input (G16) are stored as the basic plane

with this softkey and used for further program

execution („flexible plane selection“).

STORE MENU

Store the values entered and jump back to the main

menu.

SUBROUTINE

(Subroutine)

This softkey is used to display:

• The stored subroutine numbers

• The number of characters used

• The free memory space

SUBROUT. START

(Subroutine Start)

Activation of output of subroutines via the universal

interface.

SW VERSION

This softkey is used for display the software version.

TEACHIN PL BACK

not active

THREAD

Select the G functions for thread cutting with this

softkey.

TO AUTOM

(Automatic tool offset)

By traversing to the desired reference plane, the tool

offset can be measured and stored.

TOOL OFFSET

The tool offset takes into account the tool dimensions

and wear. The tool offset is stored under a tool offset

number, D1 to D99, in the tool offset memory.

Via the „TOOL OFFSET“ softkey after „DATA OUT“,

you select the output of tool offsets.

UNLOCK

not active

WORK CYCLE

(Machining cycle)

Using a softkey you can select cycles for frequently

occurring machining sequences.

Preselect: „GUIDING“ softkey.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Komentáře k této Příručce

Žádné komentáře

Siemens Sinumerik 810T Uživatelský manuál Strana 72

Komentáře k této Příručce

Související produkty a manuály pro Sítě Siemens Sinumerik 810T