
Engineer programming via the keypad
Enter phone number for SMS calls.
Identify specific events that are reported via SMS. Options are ALARMS*,
ALARM RESTORE, CONFIRMED, FAULT/TAMPER, FAULT RESTORE, MODE
CHANGE, EARLY/LATE, INHIBIT ISOLATE, ACCESS CONTROL, OTHER
EVENTS.
Enable or disable SMS functionality specific to user (limited to 4 users).
Enable or disable SMS calls for specific events (limited to the same 4 users).
* PANIC and HOLDUP alarm events are not transmitted via SMS.
14.18 X-10
X10 is a technology that allows peripheral devices, such as lights or appliances, to
be controlled by the system and system events can be used to trigger outputs on
the X10 devices. The SPC controller provides a dedicated serial port (serial port 1)
for interfacing directly with standard X10 equipment.
1. Scroll to X-10 and press SELECT.
2. Scroll to the desired programming option:
To enable or disable the X-10 functionality on the system.
To add, edit, delete or test X-10 devices.
To enable or disable the X-10 logging.
14.19 SET DATE/TIME
The date and time can be manually entered on the system. The time and date
information is displayed on the keypad and browser and is used on time-related
programming features.
1. Scroll to SET DATE/TIME and press SELECT.
The date displays on the top line of the display.
2. To enter a new date, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys.
3. Press ENTER to save the new date.
If an attempt is made to save an invalid date value, the text INVALID
VALUE is displayed for 1 second and the user is prompted to enter a valid
date.
4. To enter a new time, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys.
Komentáře k této Příručce