Siemens SIMATIC FS600 Provozní pokyny stáhnout pdf (Strana 42)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 42/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

Expansion of the safety functional example

Program sequences are prepared in the sample code that allow using the

zone pairs 3 and 4. Please proceed as follows:

• Parameterize the zone pairs 3 and 4 using the

LS4soft configuration and diagnostics software.

• Replace the memory bits (dummies) with sensors

(e.g. position switches).

Network 1 and network 2

The following picture shows the two networks.

Network 3 and network 4

In these networks the zone pairs 3 and 4 can be switched active. To do

this, replace memory bits (dummies) with the sensors (input parameter at

FC2) and parameterize the zone pairs in the laser scanner SIMATIC FS600

using the LS4soft configuration and diagnostics software.

Note

The memory bits (dummies) are set by default in OB 100.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 50 51

Žádné komentáře

Siemens SIMATIC FS600 Provozní pokyny Strana 42