Siemens EK 746 Series Provozní pokyny stáhnout pdf (Strana 23)

Connecting up

SCALANCE W788-xPRO / W74x-1PRO/RR

A5E02280448-02, Release 11/2008

Connecting up

Connectors for external antennas and power supply

Hybrid female connector and M12 male connector

The SCALANCE W788-xPRO / W788-xRR / W74x-1xx is attached to Ethernet via a

hybrid socket on the front of the housing (position A in the figure). This port also has

contacts for the operating voltage.

CAUTION

PoE with power source equipment

Note the following if you use PoE with a PSE (Power Source Equipment):

The chassis of an additional 24 V power supply must not be grounded!

CAUTION

Strain relief for the hybrid cable

Make sure that there is strain relief for the hybrid cable socket in both directions

(along the cable axis and transverse). Forces can be exerted on the socket simply

from the weight of the hybrid cable, for example when the SCALANCE W is

installed high up.

Note

Protective cap for the hybrid socket

If you do not use the hybrid socket, this must be covered with a protective cap,

otherwise IP 65 protection is lost. A suitable protective cap is available as an

accessory (order no. 6ES7194-1JB10-0XA0). If you do not use the M12 connector,

the supplied protective cap must also be fitted to retain the IP65 degree of protection.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Žádné komentáře

Siemens EK 746 Series Provozní pokyny Strana 23