Siemens S7-400PLC Specifikace Strana 35

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 80
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 34
Get a start (quick start - introduction)
01.00|FB20|en
35
Fig. 49
5 Hardware configuration is transferred to the PLC.
If the question whether the PLC/CPU should be set to stop is
displayed, the PLC had previously not been set to stop or the
wrong control was selected. The transfer may have to be ab-
orted.
In this example it is assumed that there is no PLC program yet in
the PLC.
If the PLC is now switched to "Run" and everything is correct (in-
cluding the connected hardware), the system should go into and
remain in "Run" without any disturbance.
Zobrazit stránku 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Komentáře k této Příručce

Žádné komentáře