Siemens S7-400PLC Specifikace Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 80
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
Get a start (quick start - introduction)
42 01.00|FB20|en
Fig. 59
10 CAUTION: If modules to be copied should be available on the
CPU, they will be overwritten when the message is con-
firmed and cannot be recovered.
Die The CPU should not contain any program (precondition to
running): Before this message is confirmed, you should be ab-
solutely sure that you are connected to the correct PLC and
that you really want to overwrite the modules.
Once you have ensured that no damage will occur by mov-
ing the assemblies, the PLC can be set to "Run". If every-
thing was done correctly, the system should start up with-
out any disturbance and remain in the run mode.
Otherwise, the errors must be eliminated.
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

Komentáře k této Příručce

Žádné komentáře