Siemens ET8 Series Provozní pokyny stáhnout pdf (Strana 34)

Additional Information CLV61x Dual Port (PROFINET IO)

7 Appendix

7.1 Quickstart CLV61x Dual Port – simple example with GSDML configuration

Quickstart describes the commissioning of the CLV61x Dual Port with GSDML configuration by the

PROFINET Controller (PLC) centrally. A simple example with No Handshake was chosen here, so that

no program or function module needs to be used for data transfer.

Provide 24 V DC supply for the CLV61x Dual Port and connect it with the PROFINET IO network.

S7 HW configuration:

• Install the CLV61x GSDML file in the PLC (S7 HW Config).

HW Config: "Install Extras / GSD", also see Chapter 4.1.

The CLV61x Dual Port is then added as follows in the S7 HW catalog:

"PROFINET IO / Additional FIELD DEVICES / Ident Systems / CLV61x, 2port"

• Drag the CLV61x Dual Port onto the PROFINET line.

Double click the CLV61x icon and allocate the PROFINET name.

This PN name is the individual identifier for the PN and must be clearly allocated for each relevant

device, e.g., "Scanner 10":

• When adding the CLV61x Dual Port, these four modules are added automatically:

Both of the modules Ctrl Bits In and Ctrl Bits Out must be used.

Both data modules can also be exchanged for smaller or larger ones if required.

The I/O address can be customized.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Žádné komentáře

Siemens ET8 Series Provozní pokyny Strana 34