Siemens SINUMERIK 802D sl Servisní příručka Strana 63

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 62
Manual machining
5.4 Manual machining using cycles (functions)
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
63
DANGER
Notice: If "Time feed" is selected in the “Machining technology data” screen, in order for the
pitch to be calculated correctly, the spindle override weighting must be set to "100%".
Otherwise, the tapping tool or workpiece may be damaged!!
->Prior to NC start, check that the spindle override weighting is set to 100%!
Operating sequences
You can access the drilling cycle overview by pressing the softkey "Drilling" in the basic
screen for "Manual Machine Plus".
Figure 5-24 Drilling cycle overview - "Tapping" selected
'ULOOLQJ
Zobrazit stránku 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 129 130

Komentáře k této Příručce

Žádné komentáře