Siemens SIPART PS2 6DR50xx Provozní pokyny stáhnout pdf (Strana 168)

Parameterizing/addressing

10.4 Description of parameters

SIPART PS2 with and without HART communications

168 Operating Instructions, 09/2007, A5E00074631-07

L1.LIMIT - limit for the number of strokes

Use this sub-parameter to set the base limit for the number of strokes. Set the base limit in a

range from "1" to "1.00E8".

The factory setting is "1.00E6".

L2.FACT1 - factor 1

Use this sub-parameter to set the factor for the formation of limit threshold 1. Set the factor in

a range from "0.1" to "40.0". The limit threshold is the product of "L1.LIMIT" and "L2.FACT1".

The threshold 1 fault message is displayed when the limit threshold 1 exceeds. The process

to activate and display this fault message is described in the "XDIAG" parameter.

The factory setting is "1.0".

L3.FACT2 - factor 2

Use this sub-parameter to set the factor for the formation of limit threshold 2. Set the factor in

a range from "0.1" to "40.0". The limit threshold is the product of "L1.LIMIT" and "L3.FACT2".

The threshold 2 fault message is displayed when the limit threshold 2 exceeds. The process

to activate and display this fault message is described in the "XDIAG" parameter.

The factory setting is "2.0".

L4.FACT3 - factor 3

Use this sub-parameter to set the factor for the formation of limit threshold 3. Set the factor in

a range from "0.1" to "40.0". The limit threshold is the product of "L1.LIMIT" and "L4.FACT3".

The threshold 3 fault message is displayed when the limit threshold 3 exceeds. The process

to activate and display this fault message is described in the "XDIAG" parameter.

The factory setting is "5.0".

Žádné komentáře

Siemens SIPART PS2 6DR50xx Provozní pokyny Strana 168