Siemens SIPART PS2 6DR50xx Provozní pokyny stáhnout pdf (Strana 38)

Mounting

4.2 Installing the linear actuator

SIPART PS2 with and without HART communications

38 Operating Instructions, 09/2007, A5E00074631-07

"Linear actuator IEC 534 (3 mm to 35 mm)" mounting kit 6DR4004-8V and 6DR4004-8L

Sr. No.

Quantity Name Note

① 1 NAMUR mounting bracket

IEC 534

Standardized connection point for mount with fin, column or plane

surface

② 1 Pick-up bracket Guide the pulley with the carrier pin and rotates the lever arm.

③ 2 Clamping piece Installs the pick-up bracket on the actuator spindle

④ 1 Carrier pin Installation with pulley ⑤ on lever ⑥

⑤ 1 Pulley Installation with carrier pin ④ on lever ⑥

⑥ 1 NAMUR lever For the range of stroke from 3 mm to 35 mm

The 6DR4004–8L lever is additionally required for ranges of stroke

> 35 mm to 130 mm (not in the scope of delivery).

⑦ 2 U–bolts Only for actuators with columns

⑧ 4 Hexagon bolt M8 x 20 DIN 933–A2

⑨ 2 Hexagon bolt M8 x 16 DIN 933–A2

⑩ 6 Spring lock washer A8 - DIN 127–A2

⑪ 6 Flat washer B8.4 - DIN 125–A2

⑫ 2 Flat washer B6.4 - DIN 125–A2

⑬ 1 Spring VD-115E 0.70 x 11.3 x 32.7 x 3.5

⑭ 1 Spring lock washer A6 - DIN 137A–A2

⑮ 1 Lock washer 3,2 - DIN 6799–A2

⑯ 3 Spring lock washer A6 - DIN 127–A2

⑰ 3 Socket cap screw M6 x 25 DIN 7984–A2

⑱ 1 Hexagon nut M6 - DIN 934–A4

⑲ 1 Square nut M6 - DIN 557–A4

⑳ 4 Hexagon nut M8 - DIN 934–A4

the serial numbers refer to the images of the description of the assembly procedure with

linear actuator.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 241 242

Žádné komentáře

Siemens SIPART PS2 6DR50xx Provozní pokyny Strana 38