Siemens Sinumerik 810T Manuál s instrukcemi stáhnout pdf (Strana 10)

11 Alarms 11.90

11.6 Alarm list POWER ON

Scan:

Effect:

Remedy:

RAM error on CPU

• With POWER ON

• Error in RAM area of module

• Format user memory and clear part program

in installation overall reset mode

• Replace module

Scan:

Effect:

Remedy:

RAM error on memory module

• With POWER ON

• Error in RAM area of module

• Format user memory and clear part program

in installation overall reset mode

• Replace module

SINUMERIK 810 GA3/820 GA3 (IA)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

11 Alarms 1
11 Alarms 11.90 2
11.90 11 Alarms 3
11.4 Alarm display on screen 4
11.5 Display format 4
116* ORD12 Contour monitoring 5
11.5 Display format 6
11.6 Alarm list POWER ON 7
Battery alarm - power supply 7
PLC stop 7
Incorrect unit system 7
Too many inp. buffer param 8
EPROM error 8
Wrong axis/spindle assign 8
Memory too small for UMS 9
UMS error 9
PP memory wrongly formatted 9
Wrong UMS identifier 9
RAM error on CPU 10
RAM error on memory module 10
11.7 RS232C (V.24) Alarms 11
Parity error RS232C (V.24) 11
Overflow error RS232C (V.24) 11
Frame error RS232C (V.24) 11
PLC-alarm-mem. not formated 12
Time monitoring RS232C (V.24) 12
09.91 11 Alarms 13
11.7 RS232C (V.24) Alarms 13
Wrong data in MD 576* 17
Error absolute submodule 17
Illegal software limit switch 17
DAC limit reached 18
Clamping monitoring 19
Contour monitoring 19
Set speed too high 21
Drift too high 21
Servo enable trav. axis 21
Stop behind reference point 22
Axis in several channels 22
+ Working area limit 22
- Working area limit 22
Follow-up/park for axis 22
11.9 General RESET alarms 23
Stop during threading 23
Wrong path increment 23
Emergency stop 23
Speed reduction area 24
Feed limitation 24
G35 thread lead decr. error 24
Prog. S value too high 25
Path feed too great 25
Reference point not reached 25
Block not in memory 25
Program not in memory 25
Parity error in memory 26
Progr. error on transform 26
Block > 120 characters 26
Option not available 26
Circle end point error 27
Travel thru transf. center 27
3D option not available 27
G92 Program error 28
TO, ZO Program error 28
General program error 28
Feed missing/not prog 28
Thread lead too high 28
Program error round axis 29
Pos. behind SW overtravel 29
Thread lead incr./decr 29
Max. speed = 0 29
CRC/TNRC not allowed 31
CRC plane not determinable 31
Coord. rotation n. allowed 32
Battery alarm abs. submod. 1 32
Battery alarm abs. submod. 2 32
Spindle speed too high 32
Control loop spindle - HW 33
Spindle meas. system dirty 33
Option M19 not available 33
Scale factor not allowed 33
Scale change not allowed 34
Approach not possible 34
Retract not possible 34
Wrong appr./retract plane 34
M function for C axis invalid 35
Transformation undefined 35
Transformation axes assigned 35
Transformation in zero 35
Axis doubling active 35
No additional axes possible 36
Option M 19 missing 37
11.11 Alarm list ACKNOWLEDGE 38
Geometry parameters >5 38
Polar/radius error 38
Invalid address 38
CL800 error 39
Contour definition error 39
Wrong block structure 39
Wrong setting data program 40
Subroutine error 40
Program disabled 40
Intersection error 40
Simulation disabled 41
External data input error 41
Part program no. occurs twice 42
Option RS 232 not available 42
CRC/TNRC contour error 42
Display description error 43
Graphics / text too volum 43
Graphics command too volum 43
Cursor memory not available 44
Display text not available 44
Too many fields / variables 44
Graphics option not available 44
Text not available 45
Fields / var. not displayable 45
Variable error 46
Wrong workpiece definition 46
Wrong simulation area 46
Incorrect input 46
Data block not available 46
CRC not selected on approach 47
Feed limit fictitious axis 47
Wrong data in DB 39 47
Transformationsdaten-Fehler 47
Spindle not synchronized 48
M19 still active 48
PLC user alarm 49
Signal converter missing 49
Illegal MC 5 code 49
Illegal MC 5 parameter 49
Transfer to missing DB 50
Substitution error 50
Missing MC 5 block 50
DB missing 50
Illegal segment LIR / TIR 50
Overflow - BSTACK 51
Overflow - ISTACK 51
MC 5 instruction STS 51
MC 5 - command STP 52
Illegal MC 5 timer / counter 52
Function macro 52
System commands disabled 52
MD 0000: Alarm byte No 52
MD 0001: CPU load 53
MD 0003: Alarm runtime 53
MD 0005: Cycle time 53
MD 0006: Last MC 5 time 53
This arrangement n. permitted 53
Illegal servo sampling time 54
Gap in MC 5 memory 54
Inputs assigned twice 54
Outputs assigned twice 54
Alarm byte missing 54
Wrong I/O jumpering 55
Synch. error basic program 55
Synch. error MC 5 program 55
Synch. error MC 5 data 55
Illegal block basic program 55
Illegal block MC 5 program 56
Illegal block MC 5 data 56
Sumcheck error MC 5 block 56
Sumcheck error basic program 56
No response from EU 56
EU transmission error 57
Impermissible warm restart 57
Decoding DB not available 57
Decoding DB not modulo 6 57
Decoding DB too short 58
Distributed I/Os changed 58
Overtemperature in EU 58
Stop via softkey PG 58
Timeout: MC5 user 59
Timeout: Link memory 59
Timeout: LIR / TIR 59
Timeout: TNB / TNW 59
Timeout with I / O transfer 61
Time exceeded STEP 5 61
Runtime exceeded OB2 61
Cycle time exceeded 61
Processing time delay OB2 62
Host PLC failure 62
PLC user messages 62

Komentáře k této Příručce

Žádné komentáře

Siemens Sinumerik 810T Manuál s instrukcemi Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Sítě Siemens Sinumerik 810T