Siemens SIMATIC NET CP 343-1 Uživatelský manuál stáhnout pdf (Strana 7)

1 Properties / Services

B−7

CP 343-1 Advancedfor Industrial Ethernet / Manual Part B

Release 06/2008

C79000-G8976-C202-04

S PROFINET IO − IRT communication (Isochronous Real Time)

IRT communication is possible in PROFINET IO. IRT communication is

possible only when the CP is used as a PROFINET IO controller or as a

PROFINET IO device but not for both modes at the same time.

S PROFINET CBA

Use of a SIMATIC S7-300 for Component based Automation on the basis of the

PROFINET standard of the PNO. This standard allows:

− Component technology in automation;

− Communication between intelligent devices is configured graphically instead

of requiring laborious programming

− Vendor-independent, plant-wide engineering.

Component based Automation allows access to the variables of PROFINET

components from all standard PC applications with the OPC client interface, for

example, visualization systems. Over the OPC server, objects can be selected

directly from a variable selection list of the selected PROFINET component.

S S7 communication and PG/OP communication with the following functions:

− PG functions (including routing)

− Operator control and monitoring functions (HMI)

Multiplexing TD/OP connections

− Client and server for data exchange using communication blocks

connections configured at both ends

− Server for data exchange on S7 connections configured at one end only

without communication blocks on the S7-300 / C7-300 station

S S5-compatible communication with the following functions:

− SEND/RECEIVE interface over ISO transport connections, ISO-on-TCP,

TCP and UDP connections

UDP frame buffering on the CP can be disabled during configuration. When

necessary, this allows you to achieve a shorter reaction time between the

arrival of a UDP frame and its evaluation on the CPU.

− Multicast over UDP connection

The multicast mode is made possible by selecting a suitable IP address

when configuring connections.

− FETCH/WRITE services (server; corresponding to S5 protocol) via ISO

transport connections, ISO-on-TCP connections and TCP connections;

Blocks for S7 communication (see also STEP 7 online help or manual

“System Software for S7-300/400 System and Standard Functions”):

BSEND FB12

BRCV FB13

PUT FB14

GET FB15

USEND FB8

URCV FB9

C_CNTRL FC62

1 2 3 4 5 6 7 8 9 10 11 12 ... 79 80

Komentáře k této Příručce

Žádné komentáře

Siemens SIMATIC NET CP 343-1 Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Sítě Siemens SIMATIC NET CP 343-1