Siemens SINUMERIK 802D sl Návod k obsluze Strana 113

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 340
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 112
NCK alarms
06/2009 Overview of alarms
2-113
© Siemens AG 2009 All Rights Reserved
SINUMERIK 802D sl, Diagnostics Manual, 06/2009
Return jump from asynchronous subprogram with M02/M17/M30, whereby the M code is not alone in
the block. This is impermissible if the asynchronous subprogram interrupts a block with WAITE,
WAITM or WAITMC. Remedy: Program M02/M17/M30 alone in the block or replace via RET.
22010 AUXFU_ASSIGN_TYPE: type of auxiliary function, e.g. M
22000 AUXFU_ASSIGN_GROUP: required group
22020 AUXFU_ASSIGN_EXTENSION: any required extension
22030 AUXFU_ASSIGN_VALUE: function value
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Correct the part program - max. 16 auxiliary functions, max. 5 M functions per NC block, max. 1 aux-
iliary function per group.
Program Con-
tinuation:
Clear alarm with NC START or RESET key and continue the program.
14780 [Channel %1: ] Block %2 unreleased option used (identification %3)
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Fine ID
Definitions: A non-released option has been used in the block.
Identifier Brief description
1 LaserCtrl option
2 ClearCtrl option
3 FeedAdapt option
4 AaTOff option
5 Tang option
6 LeadCtab option
7 ELG option
8 Trafo5 option
9 Traoem option
10 Transmit option
11 Tracon option
12 Tracyl option
13 Traang option
14 Oscill option
15 SynSpi option
16 Repos option
17 Spline option
18 Involute option
19 Poly option
20 Compress option
23 Masl option
24 ExtLang or ExtLanguage option not activated
25 TechCycle option
26 Liftfast option
27 ProgAccel option
33 AllAsupSynact option
34 CmdAxSpind option
35 Mea2 option
36 ProgAnaOut option
37 OptAaTOff option
41 MachineMaintenance option
42 PathFeedSAInput option
45 ElecTransfer option
46 Cut3D option
47 CDA option
48 Reserved: generic coupling option
49 Measuring cycles option
50 ForceControl option
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Zobrazit stránku 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 339 340

Komentáře k této Příručce

Žádné komentáře