Overview of alarms 06/2009
NCK alarms
2-68
© Siemens AG 2009 All Rights Reserved
SINUMERIK 802D sl, Diagnostics Manual, 06/2009
12060 [Channel %1: ] Block %2 same G group programmed repeatedly
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: The G functions that can be used in the part program are divided into groups that are syntax defining
or non-syntax defining. Only one G function may be programmed from each G group. The functions
within a group are mutually preclusive.
The alarm refers only to the non-syntax defining G functions. If several G functions from these groups
are called in one NC block, the last of these in a group is active in each case (the previous ones are
ignored).
Syntax defining G functions: 1. to 4th G group
Non-syntax defining G functions: 5. to nth G group
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-
RECT. The correction pointer positions on the incorrect block.
No remedy is required. You should, however, check whether the G function last programmed really is
the one required.
Program Con-
tinuation:
Clear alarm with NC START or RESET key and continue the program.
12070 [Channel %1: ] Block %2 too many syntax-defining G functions
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Syntax defining G functions determine the structure of the part program block and the addresses con-
tained in it. Only one syntax defining G function may be programmed in each NC block. The G func-
tions in the 1st to 4th G group are syntax defining.
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-
RECT. The correction pointer positions on the incorrect block.
Analyze NC block and distribute the G functions over several NC blocks.
Program Con-
tinuation:
Clear alarm with NC START or RESET key and continue the program.
12080 [Channel %1: ] Block %2 syntax error in text %3
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Source text area
Definitions: At the text position shown, the grammar in the block is incorrect. The precise reason for this error can-
not be specified in more detail because there are too many possibilities.
Example 1:
N10 IF GOTOF ... ; the condition for the jump is missing!
Example 2:
N10 DEF INT VARI=5
N11 X VARI ; the operation is missing for the X and VARI variables
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-
RECT. The correction pointer positions on the incorrect block.
Analyze the block and correct it in accordance with the syntax rules given in the Programming Guide.
Program Con-
tinuation:
Clear alarm with NC START or RESET key and continue the program.
12090 [Channel %1: ] Block %2 unexpected parameter %3
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Disallowed parameters in the text
(12 stránky)
(116 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce