Siemens SINUMERIK 802D sl Návod k obsluze stáhnout pdf (Strana 260)

Overview of alarms 06/2009

Cycle alarms

2-260

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61800 [Channel %1: ] Block %2: Ext. CNC system missing

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Machine data for external language MD18800: $MN_MM_EXTERN_LANGUAGE or option bit 19800

$ON_EXTERN_LANGUAGE is not set.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61801 [Channel %1: ] Block %2: Wrong G code selected

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In the program call CYCLE300<value> an impermissible numerical value was programmed for the

entered CNC System, or in the Cycles Setting Datum an incorrect value for the G Code System was

set.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61802 [Channel %1: ] Block %2: Wrong axis type

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed axis is assigned to a spindle

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61803 [Channel %1: ] Block %2: Programmed axis not available

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed axis is not in the system.

Alarm triggered by following cycles: CYCLE83, CYCLE84, CYCLE840.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check parameter _AXN.

Check MD20050-20080.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61804 [Channel %1: ] Block %2: Progr. position exceeds reference point

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed intermediate position or actual position is behind the reference point.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 339 340

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Návod k obsluze Strana 260

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl