Siemens SINUMERIK 802D sl Návod k obsluze stáhnout pdf (Strana 267)

Cycle alarms

06/2009 Overview of alarms

2-267

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61989 [Channel %1: ] Block %2: D1 is not programmed as active tool cutting

edge

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycles: CYCLE73, CYCLE74, CYCLE75.

Remedy: --

62000 [Channel %1: ] Block %2: Insert new tool

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Please load new tool.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62100 [Channel %1: ] Block %2: No drilling cycle active

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No modal drilling cycle has been called before the drilling pattern cycle call. Alarm triggered by follow-

ing cycles: HOLES1, HOLES2.

Remedy: Check whether a drilling cycle was called prior to calling the drilling pattern cycle.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62101 [Channel %1: ] Block %2: Milling direction incorrect - G3 is generated

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Synchronous or reverse rotation programmed. But the spindle does not rotate at a cycle call.

Remedy: Check value in paramter CDIR.

62102 [Channel %1: ] Block %2: pocket not completely solidly machined during

finishing

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62103 [Channel %1: ] Block %2: No finishing allowance programmed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No finishing allowance is programmed, although it is necessary for this machining.

Reaction: Alarm display.

Remedy: Programm a finishing allowance.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62104 [Channel %1: ] Block %2: Drilling cycle incorrectly defined

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 339 340

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Návod k obsluze Strana 267

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl