Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 112)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-112

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

12701 Channel %1 block %2 illegal interpolation type for contour definition

active

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In one contour definition block, G01 is not active as interpolation function. In one contour definition

block, the linear interpolation always has to be selected with G01. G00, G02, G03, G33 etc. are not

permitted.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program. Program linear interpolation G01.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12710 Channel %1 block %2 illegal language element in external language

mode

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed language element is not allowed or unknown in external language mode. Only the

language elements from Siemens mode which are used for subprogram calls (except for Lxx) and the

language constructs for program repetition with REPEAT (UNTIL) are allowed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12720 Channel %1 block %2 program number for macro call (G65/G66) missing

Parameters: %1 = channel number

%2 = block number, label

Definitions: During macro call with G65/G66 no program number was defined. The program number must be pro-

grammed with address "P"

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12722 Channel %1 block %2 multiple ISO_2/3 macro or cycle calls in the block

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: A mixture of cycle and macro calls are programmed in a block, e.g. cycle call with G81 - G89 together

with an M macro in the block or a G65/G66 macro call together with M macros in the block.

Only one macro or cycle call can appear in an NC block.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Divide the cycle and macro calls into several blocks.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12724 Channel %1 block %2 no radius programmed for cylinder interpolation

activation/deactivation

Parameters: %1 = channel number

%2 = block number, label

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 391 392

Siemens SINUMERIK 802D sl Specifikace Strana 112

Komentáře k této Příručce

Siemens SINUMERIK 802D sl Specifikace Strana 112

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl