Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 130)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-130

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

14195 Channel %1 block %2 D number with G49

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: G49 (select tool length compensation) and an D word not equal to D0 have been programmed simul-

taneously.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

NC Stop on alarm at block end.

Remedy: Change part program

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14196 Channel %1 block %2 error %3 on interpreting the contents of

$SC_CUTDIRMOD

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Error code

Definitions: An error has occured during the interpretation of the strings contained in setting data

$SC_CUTDIRMOD. This setting data is always read when a new edge is selected. The error code

indicates the cause of the error:

1: The string only consists of blanks or a sign

2: Unknown frame name after $P_

3: No colon after the first valid frame name

4: Insufficient memory space for creating a frame internally

5: Invalid frame index

6: Further characters found after complete string

7: Second frame name is missing after the colon

8: Impermissible frame rotation (surface normals are rotated against each other by 90 degrees or

more)

9: Invalid frame chain (the first frame must come before the second frame in the frame chain)

10: Invalid axis name

11: Axis is not a rotary axis

12: Invalid string that cannot be assigned to any of the error types 1 to 11

20: Invalid angle statement (numerical value)

30: Invalid angle of rotation (not an integer multiple of 90 degrees)

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Enter valid string in setting data $SC_CUTDIRMOD.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

14197 Channel %1 block %2 D number and H number programmed

simultaneously

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: A D word and H word have been programmed simultaneously.

Reaction: Correction block is reorganized.

Local alarm reaction.

Interface signals are set.

Alarm display.

NC Stop on alarm at block end.

Remedy: Change part program

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 391 392

Siemens SINUMERIK 802D sl Specifikace Strana 130

Komentáře k této Příručce

Siemens SINUMERIK 802D sl Specifikace Strana 130

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl