Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 370)

System reactions on alarms 06/2007

Cancel criteria for alarms

4-370

SINUMERIK 802D sl, Diagnostics Manual, Edition 06/2007

4.1 Cancel criteria for alarms

Name ONE_IPO_CLOCK_DELAY_ALARM_REACTION

Effect All alarm reactions are delayed by one cycle when an alarm is output. This functionality

became necessary as part of ESR development.

− All alarm reactions are delayed by one IPO cycle on alarm.

Name CANCELCLEAR

Effect The alarm is cleared by pressing the Cancel key in any channel. It is also cleared by the

Start part program key.

− Clear the alarm with the Clear key or with NC START

Name CLEARHIMSELF

Effect Self-clearing alarm. The alarm is cleared not by an operator action but explicitly by a

"clearAlarm" in programmed the NCK source code.

− The alarm is no longer displayed when the alarm cause has been removed. No

other operator actions are required.

Name NCSTARTCLEAR

Effect The alarm is cleared by starting a program in the channel, in which the alarm occurred.

The alarm is also cleared by an NC reset.

− Clear the alarm with NC START or the RESET key and continue the program.

Name POWERONCLEAR

Effect The alarm is canceled by turning off / turning on the control system (POWER ON).

− Switch the control OFF - ON.

Name RESETCLEAR

Effect The alarm is cleared by pressing the Reset key in the channel in which the alarm

occurred.

− Clear alarm with the RESET key. Restart the part program.

Name BAGRESETCLEAR

Effect The alarm is cleared by a "BAGRESETCLEAR" command or by carrying out a reset in

all channels of this mode group.

− Press the RESET key to clear the alarm in all channels of this mode group. Restart

the part program.

1 2 ... 365 366 367 368 369 370 371 372 373 374 375 ... 391 392

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 370