Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 278)

Overview of alarms 06/2007

Cycle alarms

2-278

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61114 Channel %1 Block %2: Machining direction G41/G42 incorrectly defined

Parameters:

Definitions: Source (cycle):

CYCLE72

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The machining direction of the cutter radius compensation G41/G42 has been incorrectly selected.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61115 Channel %1 Block %2: Approach or retract mode(straight / circle / plane /

space) incorrectly defined

Parameters:

Definitions: Source (cycle):

CYCLE72

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: An incorrect contour approach or retract mode was defined; check parameter _AS1 or _AS2.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61116 Channel %1 Block %2: Approach or retract path = 0

Parameters:

Definitions: Source (cycle):

CYCLE72

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The approach or retract path is set to zero, it must be increased; check parameter _LP1 and/or _LP2.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61117 Channel %1 Block %2: Active tool radius <= 0

Parameters:

Definitions: Source (cycle):

CYCLE71

POCKET3

POCKET4

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The radius of the active tool is negative or zero. This is not permitted.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61118 Channel %1 Block %2: Length or width = 0

Parameters:

Definitions: Source (cycle):

CYCLE71

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 278

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl