Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 172)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-172

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

16698 Channel %1 block %2 following axis/spindle %3 leading axis/spindle %4

has not been defined.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Axis name, spindle number

Definitions: An instruction to an undefined leading axis/spindle of a coupling is to be executed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part programm.

Define the leading axis/spindle and activate, if necessary, before the instruction.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16699 Channel %1 block %2 following axis/spindle %3 leading axis/spindle %4

has not been defined.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Axis name, spindle number

Definitions: An instruction to an undefined leading axis/spindle of a coupling is to be executed.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part programm.

Define the leading axis/spindle and activate, if necessary, before the instruction.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16700 Channel %1 block %2 axis %3 invalid feed type

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

Definitions: In a thread cutting function, the feed has been programmed in a unit that is impermissible.

G33 (thread with constant lead) and the feed have not been programmed with G94 or G95.

G33 (thread with constant lead) is active (modal) and G63 is programmed additionally in a following

block ( conflict situation! (G63 is in the 2nd G group, G33, G331 and G332 are in the 1st G group).

G331 or G332 (rigid tapping) and the feed have not been programmed with G94.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Use only the feed type G94 or G95 in the thread cutting functions.

After G33 and before G63, deselect the thread cutting function with G01.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16710 Channel %1 block %2 axis %3 master spindle not programmed

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

Definitions: A master spindle function has been programmed (G33, G331, G95, G96) but the speed or the direc-

tion of rotation of the master spindle is missing.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Add S value or direction of rotation for the master spindle in the displayed block.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 172

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl