Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 270)

Overview of alarms 06/2007

Cycle alarms

2-270

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61003 Channel %1 Block %2: No feed programmed in cycle

Parameters:

Definitions: Source (cycle):

CYCLE71

CYCLE72

CYCLE371T to CYCLE374T

CYCLE383T to CYCLE385T

CYCLE381M, CYCLE383M, CYCLE384M, CYCLE387M

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The parameter for feedrate has been incorrectly set and must be altered.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61004 Channel %1 Block %2: Incorrect configuration of geometry axes

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The geometry-axes sequence is wrong. CYCLE328

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61006 Channel %1 Block %2: Tool radius too large

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The tool radius is too large for machining. Alarm triggered by following cycles: CYCLE930,

CYCLE951, E_CP_CE, E_CP_CO, E_CP_DR, E_PO_CIR, E_PO_REC, F_CP_CE, F_CP_CO,

F_CP_DR, F_PO_CIR, F_PO_REC.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Select a smaller tool.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61007 Channel %1 Block %2: Tool radius too small

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The tool radius is too small for machining. Alarm triggered by following cycles: CYCLE92, E_CP_CO,

E_SL_CIR, F_CP_CO, F_PARTOF, F_SL_CIR.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Select a larger tool.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 270

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl