Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 198)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-198

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

17018 Channel %1 block %2 incorrect value for parameter %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Parameter name

Definitions: An incorrect value has been assigned to the stated parameter.

Only the following values are permissible for the parameter $P_WORKAREA_CS_COORD_SYSTEM

=1 for workpiece coordinate system

=3 for settable zero system.

Reaction: Interpreter stop

Interface signals are set.

Alarm display.

Remedy: Assign another value.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

17020 Channel %1 block %2 illegal array index 1

Parameters: %1 = channel number

%2 = block number, label

Definitions: A read or write access has been programmed to an array variable (e.g. arithmetic parameter) with

invalid 1st array index.

e.g. R2000 = 5; parameter number 2000 not defined

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the specification of array elements in the access instruction to match the defined size.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17030 Channel %1 block %2 illegal array index 2

Parameters: %1 = channel number

%2 = block number, label

Definitions: A read or write access has been programmed to an array variable with invalid 2nd array index. The

valid array indices must be contained within the defined array size and the absolute limits (0 - 32 766).

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the specification of array elements in the access instruction to match the defined size.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17040 Channel %1 block %2 illegal axis index

Parameters: %1 = channel number

%2 = block number, label

Definitions: A read or write access has been programmed to an axial variable in which the axis name cannot be

unambiguously imaged on a machine axis.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Use the machine axis name as the axis index.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 391 392

Siemens SINUMERIK 802D sl Specifikace Strana 198

Komentáře k této Příručce

Siemens SINUMERIK 802D sl Specifikace Strana 198

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl