Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 276)

Overview of alarms 06/2007

Cycle alarms

2-276

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61105 Channel %1 block %2: Milling cutter radius too large

Parameters:

Definitions: Source (cycle):

SLOT1, SLOT2

POCKET3, POCKET4

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The cutter diameter in the tool offset memory is larger than the pocket or slot width.

Use a smaller cutter or change the pocket width

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61106 Channel %1 block %2: Number of or distance between circular elements

Parameters:

Definitions: Source (cycle):

HOLES2

SLOT1, SLOT2

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Incorrect parameterization of NUM or INDA.

The layout of the circle elements in a full circle is not possible.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61107 Channel %1 block %2: First drilling depth incorrectly defined

Parameters:

Definitions: Source (cycle):

CYCLE83

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Change value for first drilling depth (first drilling depth is in the opposite direction to the total drilling

depth)

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61108 Channel %1 Block %2: Values for parameters _RAD1 and _DP1 not

permissible

Parameters:

Definitions: Source (cycle):

POCKET3

POCKET4

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: The parameters _RAD1 and _DP for defining the path for the depth infeed have been incorrectly set.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 276

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl