Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 147)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-147

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

14780 Channel %1 block %2 unreleased option used (identification %3)

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: A non-released option has been used in the block.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program, retrofit option.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14782 Channel %1 block %2 non-active function used (identification %3)

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Detailed identification

Definitions: An inactive function is used in the block.

Flag, short description

1 Transformation

2 Tool H numbers

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program.

Activate function.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14783 Channel %1 block %2 coordinate system-specific working area limitation

is not active

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: An attempt is made in the block to activate a group of the coordinate system-specific working area

limitation.

However, this group is not set up (see machine data $MC_MM_NUM_WORKAREA_CS_GROUPS).

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

The NC program is stopped. The G code of the group WALCS01 - WALCS10 can be changed.

Remedy: - Modify part programm.

- Activate more coordinate system-specific working area limitations.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14790 Channel %1 block %2 axis %3 programmed by PLC

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis

Definitions: In the NC block, an axis has been programmed that is already being traversed by the PLC.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program, do not use this axis.

Stop traversing motion of the axis by the PLC, modify part program (insert WAITP).

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 147

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl