Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 281)

Cycle alarms

06/2007 Overview of alarms

2-281

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61128 Channel %1 block %2: Insertion angle = 0 for insertion with oscillation or

helix

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: SLOT1.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check parameter _STA2.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61129 Channel %1 block %2: perpendic. approach and retraction during

contour milling only allowed with G40

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE72.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61130 Channel %1 block %2: positions of parallel axes cannot be compensated.

No workpiece reference agreed.

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE69.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61131 Channel %1 block %2: parameter _GEO incorrect, _GEO=%4

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE69.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Siemens SINUMERIK 802D sl Specifikace Strana 281

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl