
Overview of alarms 06/2007
Cycle alarms
2-318
" Siemens AG 2007 All Rights Reserved
SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition
Program Con-
tinuation:
Clear alarm with the RESET key. Restart part program
61800 Channel %1 block %2: Ext. CNC system missing
Parameters:
Definitions: Source (cycle):
CYCLE328,
CYCLE370T to CYCLE374T, CYCLE376T,
CYCLE383T to CYCLE385T,
CYCLE381M, CYCLE383M, CYCLE384M,
CYCLE387M
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: Machine data for external language MD 18800 MM_LANGUAGE or option bit 1919800
ON_EXTERN_LANGUAGE is not set.
Program Con-
tinuation:
Clear alarm with the RESET key. Restart part program
61801 Channel %1 block %2: Wrong G code selected
Parameters:
Definitions: Source (cycle):
CYCLE370T to CYCLE374T, CYCLE376T,
CYCLE383T to CYCLE385T
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: An impermissible numerical value has been programmed in the CYCLE ... <value> program call, or
an incorrect value was specified in the cyclic setting data for the G code system. Correct the values.
Program Con-
tinuation:
Clear alarm with the RESET key. Restart part program
61802 Channel %1 block %2: Wrong axis type
Parameters:
Definitions: Source (cycle):
CYCLE328
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: The programmed axis is assigned to a spindle.
Program Con-
tinuation:
Clear alarm with the RESET key. Restart part program
61803 Channel %1 block %2: Programmed axis not available
Parameters:
Definitions: Source (cycle):
CYCLE328
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: The programmed axis is not in the system. Check MD 20050 to MD20080
Program Con-
tinuation:
Clear alarm with the RESET key. Restart part program
Komentáře k této Příručce