Siemens SINUMERIK 802D sl Specifikace stáhnout pdf (Strana 185)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-185

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

16909 Channel %1 action %2<ALNX> not allowed in current mode

Parameters: %1 = channel number

%2 = action number/action name (see Section 1.5 Action List)

Definitions: You have to activate a different operating mode for the activated function.

Reaction: Alarm display.

Remedy: Check operation and operating state.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16911 Channel %1 mode change is not allowed

Parameters: %1 = channel number

Definitions: The change from overstoring into another operating mode is not allowed.

Reaction: Alarm display.

Remedy: Once overstoring has been terminated, it is possible to change to another operating state again.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16912 Channel %1 program control: action %2<ALNX> only possible in reset

state

Parameters: %1 = channel number

%2 = action number/action name (see Section 1.5 Action List)

Definitions: The action can be performed only in the Reset state.

Example: Program selection through HMI or channel communication (INIT) can only be performed in

Reset state.

Reaction: Alarm display.

Remedy: Reset or wait until processing is terminated.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16913 Mode group %1 channel %2 mode change: action %3<ALNX> not

allowed

Parameters: %1 = channel number

%2 = mode group number

%3 = action number/action name (see Section 1.5 Action List)

Definitions: The change to the desired mode is not permitted. The change can only take place in the Reset state.

Example:

Program processing is halted in AUTO mode by NC Stop. Then there is a mode change to JOG mode

(program status interrupted). From this operating mode it is only possible to change to AUTO mode

and not to MDA mode!

Reaction: Alarm display.

Remedy: Either activate the RESET key to reset program processing, or select the mode in which the program

was being processed previously.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16914 Mode group %1 channel %2 mode change: action %3<ALNX> not

allowed

Parameters: %1 = channel number

%2 = mode group number

%3 = action number/action name (see Section 1.5 Action List)

Definitions: Incorrect mode change, e.g.: AUTO ( MDAREF

Reaction: Alarm display.

Remedy: Check operation or selected operating mode.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 391 392

Siemens SINUMERIK 802D sl Specifikace Strana 185

Komentáře k této Příručce

Siemens SINUMERIK 802D sl Specifikace Strana 185

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Siemens SINUMERIK 802D sl